0
Authorized Canadian Distributor & Service Centre
Your Cart
(empty)
Cart : (empty)

New GW Products

GW Instek releases brand new products every month. Check out the latest product releases Click Here to see more new products.

DC, 10Hz ~ 10MHz High-Frequency LCR Meter

LCR-8220 - DC, 10Hz ~ 20MHz High-Frequency LCR Meter

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

by quote only

Add to Cart
Details

PEL-3535H - (800V/ 262.5A/ 5250W) Single-Channel Programmable D.C. Electronic Load

The PEL-3000 series, a single-channel, programmable D.C. electronic load with 0.01mA current resolution and 16A/μs current Slew Rate, is very ideal for testing server power supply and SPS (Switching Power Supply) for commercial and industrial computers. For a heavy-duty device like cloud ecosystem running 24-hour nonstop operations, a stable and high-power power supply, ranging from 175W to 1050W, is required to maintain the normal operation of server, Hub, and the equipment of data storage and internet communications. Owing to the increasing demand of data transmission and large scale data storage of telecommunications systems, the infrastructure of internet communications is in the pace of rapid expansion. This has greatly boosted the market demand of telecommunications equipment powered by power supply of 2000W and above. The flexible power combination of PEL-3000 meets the test requirements of present high-power power supply.

by quote only

Add to Cart
Details

MDO-2102AG - 100MHz, 2-channel, DSO, Spectrumanalyzer, dual channel 25MHz AWG

MDO-2000A is an advanced version of MDO-2000E. The selectable bandwidth range is upgraded to 300MHz. The full bandwidth ranges include 300MHz, 200MHz and 100MHz. The sampling rate has upgraded to Max. 2GSa/s and the memory depth has also been upgraded to 20M/CH. Hence, the three major specifications of oscilloscopes have been improved. The new models of the series feature 2 channels including MDO-2000A and MDO-2000AG. The entire series offers the functions of oscilloscope and spectrum analyzer. On top of that, MDO-2000AG features a dual-channel 25MHz arbitrary waveform generator. The new generation MDO-2000A series provides better sampling rate and memory depth for users to obtain more realistic signal integrity, and higher bandwidth selections meet the measurement requirements of higher frequencies.

$1,170 (USD)

Add to Cart
Details

GSP-818 - 1.8GHz

GSP-818 is a new general spectrum analyzer, which supports a frequency range of 1.8 GHz and provides testing requirements for RF products during the development/production phases. GSP-818 has a built-in 20dB amplifier and provides an adjustable range of resolution bandwidth (RBW) from 10Hz to 3MHz. In addition, it has the AM/FM signal demodulation function and the ACPR/OCBW/CHPW test functions to meet the requirements of general RF signal measurement.

by quote only

Add to Cart
Details

GPT-12002 - AC 200VA AC/DC Withstanding Voltage Electrical Safety Analyzer

GW Instek introduces the flagship model (200VA output capacity) safety analyzer-the GPT-12000 series, which is the first safety analyzer in the world to comply with IEC 61010-2-034 (Safety requirement for electrical requirement for measurement, control and laboratory use – particular requirements for measurement equipment for insulation resistance and test equipment for electric strength), which stipulates that the requirements of the software and hardware interfaces must be followed while designing high voltage and insulation resistance test and measurement instruments so as to ensure that users are provided with necessary protection and warning while using the instruments.

by quote only

Add to Cart
Details

PEL-3744H - (800V/ 367.5A/ 7350W) Single-Channel Programmable D.C. Electronic Load

The PEL-3000 series, a single-channel, programmable D.C. electronic load with 0.01mA current resolution and 16A/μs current Slew Rate, is very ideal for testing server power supply and SPS (Switching Power Supply) for commercial and industrial computers. For a heavy-duty device like cloud ecosystem running 24-hour nonstop operations, a stable and high-power power supply, ranging from 175W to 1050W, is required to maintain the normal operation of server, Hub, and the equipment of data storage and internet communications. Owing to the increasing demand of data transmission and large scale data storage of telecommunications systems, the infrastructure of internet communications is in the pace of rapid expansion. This has greatly boosted the market demand of telecommunications equipment powered by power supply of 2000W and above. The flexible power combination of PEL-3000 meets the test requirements of present high-power power supply.

by quote only

Add to Cart
Details

Promotions and Clearance

Looking to save some money on your next test instrument? We posts new promotion and clearance products regularly. Check out the products below. If you would like to view more clearance products, click here.

GPC- Tripple Output Analog Power Supply

Triple Output Auto Tracking Auto Series and Parallel Operation Low Ripple Noise Four Indicator Meters Continuous / Dynamic Load Can be Selected Overload and Reverse Polarity Protection

Triple Output Auto Tracking Auto Series and Parallel Operation Low Ripple Noise Four Indicator Meters Continuous / Dynamic Load Can be Selected Overload and Reverse Polarity Protection...

Price : $322 (USD)

click here for more information

GTP-150A-2 - Oscilloscope Probe, 150MHz (10:1/1:1) Switching Passive Probe, BNC(P/M)

GTP-150A-2 10:1 / 1:1 150MHz for GDS-1152A-U

$59 (CAD)
$40 (USD)

Add to Cart
Details

GOM-801H - High Precision Programmable DC Milli-Ohm Meter

3 1/2 digits D.C. Milli-ohm Meter. The GOM-801H milliohm meter is the ideal device for quick and precise component and material resistance measurements. The main display is equipped with a 3 1/2 digit 0.5" red LED with comparator indicators. Measurable objects can cover cable joints, earth bonds, switches, motors, transformers and generators. The front panel features seven selectable test ranges, 20mΩ to 20kΩ. The internal comparator is fully adjustable for the user settable Hi/Lo comparison indicator. The GOM-801H is the best choice for an inexpensive, easy to use, yet reliable milliohm meter.

$555 (CAD)
$374 (USD)

Add to Cart
Details

GCM-407 - Digital Clamp Meter with True RMS Measurement

Digital Clamp Meter -- ACA, ACV, DCV, Ohm, Diode, Buzzer. The GCM-403 is digital clamp meter can measure AC/DC voltage, AC/DC current, resistance, diodes, continuity, capacitance, frequency and temperature. Tapered jaws, auto range, data hold, REL function and auto power off which makes it a superb tool for electricians. The GCM-407 is digital clamp meter with true RMS measurement. Featuring tapered jaws, a wide range (AC 600A/750V, DC 1000V max input), capacitance measurement as well as non-contact voltage sensing function and the ability to keep MAX/MIN or hold data and automatically power down make the GCM-407 suitable for almost any cable measurement task.

$102 (CAD)
$69 (USD)

Add to Cart
Details

GSP-9330TG - 3.25 GHz Spectrum Analyzer with Tracking Generator

The brand new GSP-9330, a high test speed spectrum analyzer with 3.25 GHz, provides the fastest 204 μs sweep speed. Users, via high speed sweep time, can easily handle and analyze modulation signals. The keys to handling modulated signals are fast sweep time and signal demodulation functions. In addition to the analog AM/FM demodulation and analysis function, GSP-9330 also provides digital signal ASK/FSK, and 2FSK demodulation and analysis capabilities. Nowadays, EMC issues are very crucial to product's design processes. Therefore, GSP-9330 has incorporated the EMC pretest solution to facilitate EMC tests. The simple and easy EMC pretest procedures from GSP-9330 can tremendously shorten users' product launch timeline.

$10,863 (CAD)
$7,497 (USD)

Add to Cart
Details

GTL-121 - Sense Lead, O-type to free Lead, 1200mm

GTL-121 Test Leads

$37 (CAD)
$28 (USD)

Add to Cart
Details

PSB-2400L2 - 800W Multi-Range, 2-Channel, Programmable Switching D.C. Power Supply

(0~80V x 2 / 0~40A x 2 / 800W) Multi-Range DC Power Supply

$3,788 (CAD)
$2,615 (USD)

Add to Cart
Details