0
Authorized Canadian Distributor & Service Centre
Your Cart
(empty)
Cart : (empty)

GDS-806C - 60MHz, 2-channel, Color LCD Display DSO

  60MHz, 2-channel, Color LCD Display DSO

GW Instek

Category : Oscilloscopes

by quote only Add to Cart

Documents:
Datasheet

Overview
Features
Information
Calibration

This product is discontinued.It was replaced by The GW Instek GDS-806C - 60MHz, 2-channel, Color LCD Display DSO

Instek GDS-806C: Max. Current 3A For GPC Series, GPD-3303S, GPR-U/M/H Series, GPS Series, PPE-3323, PPS-3635G, PPT-1830G/3615G, PSS-3203, PST-3201, SPD-3606

  • 60MHz Bandwidth With COLOR Display
  • 125k Memory and 12 Division Horizontal Display
  • 25GS/s Sampling Rate for Repetitive Waveforms
  • Advanced Trigger : Pulse Width , TV Line, Event Delay and Time Delay
  • Go/NoGo , Auto Setup Sequence and TTF Function
  • Built-In Help Menu, Multi-Language and FREE PC Software
  • Standard Interface: RS-232C
  • Optional Interface: GPIB, Printer Port and USB 2.0
           
     Display System     Display Device   Color (320 x 240)    
      Display Contrast   Adjustable    
      Waveform Display  Graticule 8 x 10 divisions (8 x 12 when menu off)  

 
     Vertical System     Bandwidth   60MHz    
      Channels      2    
      Vertical Resolution   8-bit    
      Vertical Sensitivity   2mV/div ~ 5V/div    
      Vertical Accuracy   ±3%    
      Rise Time   <5.8ns    
      Input Coupling   AC , DC , Ground    
      Input Impedance   1MΩ ± 2% , ~18pF    
      Polarity   Normal and Invert    
      Max. Voltage Between Signal & 300V ( DC+AC peak ) , CATII    
      common at Input BNC        
      Waveform Signal Process CH1 + CH2 , CH1 - CH2 , FFT  
      Offset Range   2mV/div~50mV/div : ± 0.5V; 100mV/div~500mV/div : 1V/div~5V/div : ±50V
      BW Limit   20MHz ( -3dB )    

     Horizontal System     Time Base Range   1ns/div ~ 10s/div ( 1-2-5 increments ), Roll : 250ms/div ~ 10s/div
      Time Base Mode   Main , Window , Window Zoom , Roll , X-Y  
      Time Base Accuracy   ± 0.01%    
      Delay Range   Pre-trigger : 20 div  

     Signal Acquisition     Real-Time Sample Rate 100MS/s maximum on each channel  
     System     Equivalent Sample Rate   25GS/s E.T. maximum on each channel  
      Record Length   125h/CH    
      Peak Detection   10ns (500ns/div ~ 10s/div)  
      Acquisition Mode Sample , Peak Detect , Average  
      Average   2 , 4 , 8 , 16 , 32 , 64 , 128 , 256  

     Trigger     Trigger Source   CH1 , CH2 , Line , Ext  
      Mode   Auto Level , Auto , Normal , Single , TV , Time Delay , Event Delay , Edge ,
        Pulse Width , AC , DC , HF , LF , Noise Reject
      Coupling   AC , DC , HF , LF , Noise Reject  
      Sensitivity   DC ~ 25MHz : Approximate 0.5div or 5mV
      25MHz ~ 60MHz : Approximate 1.5div or 15mV  

     X - Y Mode     X-Axis Input / Y-Axis Input Channel 1 / Channel 2
      Phase Shift   ± 3° at 100 kHz    

     Cursor and     Auto Voltage Measurement Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin
     Measurement     Auto Time Measurement Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width,
      Duty Cycle
      Cursor Measurement   Voltage difference between cursors (∆V), Time difference between
      cursors (∆T), Frequency difference between cursors (1/∆T)

     Frequency Counter     Readout Resolution   6 digits    
      Frequency Range   AC Coupled , 20Hz~rated bandwidth ; resolution: 10Hz
      Signal Source   All available trigger source except the Pulse Width & Video Trigger mode  

     Adjustable Probe     Frequency Rang   1 kHz ~ 100 kHz   1KHz / STEP  
     Calibration Signal     Duty Cycle   5% ~ 95%    5% / STEP  

Do you have a 60MHz, 2-channel, Color LCD Display DSO that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your 60MHz, 2-channel, Color LCD Display DSO calibrated today! Click Here!