0
Authorized Canadian Distributor & Service Centre
Your Cart
(empty)
Cart : (empty)

GOS-653G - 50MHz, 2 Channel, Oscilloscope with Delayed Sweep

50MHz, 2 Channel, Oscilloscope with Delayed Sweep

GW Instek

Category : Oscilloscopes

$810 (USD) Add to Cart

Documents:
Datasheet

Overview
Features
Information
Calibration

This product is discontinued.It was replaced by The GW Instek GOS-653G - 50MHz, 2 Channel, Oscilloscope with Delayed Sweep

Instek GOS-653G: 50MHz, Dual Channel - Delayed Sweep (GOS-653G) - Built-In Delay Line (GOS-653G) - TV Synchronization - CH1 Output - Z Axis Input - ALT Triggering Function - Hold Off Function - Trigger Level Lock Function - 6-inch rectangular type with internal graticule 0%, 10%, 90% and 100% markers. 8 x 10 div (1div=1cm) 310(W) x 150(H) x 455(D)mm; Approx. 8.2kg - AC 100V/120V/220V/230V /- 10%, 50Hz/60Hz

  • 50 MHz, Dual Channel
  • Delayed Sweep
  • Built-in Delay Line
  • TV Synchronization
  • Z axis input
  • ALT Triggering Function
  • Hold off Function
  • Trigger level lock function
  • CH1 output
  SPECIFICATIONS


     CRT


Type


6-inch rectangular type with internal graticule;
0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)

Phosphor P31
Accelerating Potential 12 kV
Illumination Continuously adjustable
Z-axis input Input Impedance : Approx. 5kΩ
Sensitivity : Above 3Vp-p
Bandwidth : DC ~ 5MHz

     VERTICAL SYSTEM

Sensitivity 5mV ~ 5V/DIV +3%, 1mV ~ 2mV/DIV +5%
Bandwidth DC ~ 50MHz
DC ~ 15MHz at 1mV ~ 2mV/DIV
Rise Time 7nS (23.3nS at 1mV ~ 2mV/DIV)
Signal Delay Leading edge can be monitored
Input Impedance Approx. 1MΩ
Input Coupling AC, DC, GND
Vertical Mode CH1, CH2, DUAL, CH2 INV, ADD.(Dual automatic switching ALT and CHOP)

     HORIZONTAL SYSTEM

A (main) Sweep Time 0.1µS ~ 0.5S / DIV+3%, 
100nS ~ 50mS / DIV+5% (x 10MAG), 
10nS ~ 50nS/DIV+8% (x 10MAG)
B (delay) Sweep Time 0.1µS ~ 0.5mS / DIV+3%, 
100nS ~ 50µS / DIV+5%(x 10MAG),
10nS ~ 50nS / DIV+8% (x 10MAG)
Delay Time 1µS ~ 5mS, +5%
Delay Time Jitter Better than 1:10000

     TRIGGER

Trigger Mode AUTO, NORM, SINGLE
Trigger Source CH1, CH2, ALT, LINE, EXT
Trigger Coupling AC, DC, HR, REJ, TV
Trigger Slope + or   -

     X-Y OPERATION

Sensitivity 5mV ~ 5V / DIV4%
X-axis Bandwidth DC ~ 2MHz
Phase Error 3º or less from DC ~ 100kHz

     OUTPUT SIGNAL

Trigger Signal Output Voltage : approx. 50mV / DIV into 50Ω
Calibrator Output 1kHz Squarewave, 2Vpp+2%

     POWER SOURCE AC 100V / 120V / 220V / 230V + 10%, 50 / 60Hz

     ACCESSORIES Power cord x 1;
Instruction manual x 1 ;
Probes(10:1/1:1)x2

     DIMENSIONS & WEIGHT 310(W) x 150(H) x 455(D) mmï¼›Approx. 8.2kg

 

Do you have a 50MHz, 2 Channel, Oscilloscope with Delayed Sweep that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your 50MHz, 2 Channel, Oscilloscope with Delayed Sweep calibrated today! Click Here!