0
Authorized Canadian Distributor & Service Centre
Your Cart
(empty)
Cart : (empty)

GOS-620FG - 20MHz Oscilloscope with Built-in 1MHz Function Generator

20MHz Oscilloscope with Built-in 1MHz Function Generator

GW Instek

Category : Oscilloscopes

$786 (CAD)
$530 (USD)
Add to Cart

Documents:
Datasheet

Overview
Features
Information
Calibration

This product is discontinued.

Instek GOS-620FG: Built-In 1MHz Function Generator - 20MHz, Dual Channel - High Sensitivity 1mV/div - TV Synchronization - Z Axis Input - ALT Triggering Function - CH1 Output - Economic Choice for High Quality - 310(W) x 150(H) x 455(D)mm; Approx. 8.5kg

  • Built-in 1MHz Function Generator
  • 20 MHz, Dual Channel
  • High sensitivity 1mV/DIV
  • TV Synchronization
  • Z axis input
  • ALT Triggering Function
  • CH1 output
  • Economic Choice for High Quality

  SPECIFICATIONS


     CRT


Type


6-inch rectangular type with internal graticule 8 x 10 DIV (1 DIV=1 cm)

Phosphor P31
Accelerating Potential 2 kV
Z-axis input Sensitivity:Above 5Vpp
Max. input voltage:30V (DC+AC peak)
Bandwidth:DC ~ 2MHz
Polarity Positive-going input decrease
Focus Control Auto focus

     FUNCTION GENERATOR

Frequency Range

0.1Hz ~ 1MHz (7range)

Waveform Sine Wave, Square Wave, Triangle Wave
Frequency Variable Range 10:1 or more
Output Impedance 50Ω +10%
Voltage Over 14Vpp (open circuit) continuous conversion
DC offset possible over + 6V when open
Sinewave Distortion 2% Max. (10Hz ~ 100kHz)
Squarewave Unsymmetry +3% or less (in 1kHz maximum)
Squarewave Rise/Fall Time 50Ω output:120nS or less

     VERTICAL SYSTEM

Sensitivity 5mV ~ 5V/DIV+3%, 1mV ~1V/DIV+5% (using x 5MAG)
Bandwidth DC to 20MHz (x 5MAG:DC to 7MHz)
Rise Time Approx. 17.5nS (x 5MAG:Approx. 50nS)
Max. Input 300V (DC+AC peak) at 1kHz
Input Coupling AC, DC, GND
Input Impedance Approx. 1MΩ// 25pF
Vertical Mode CH1, CH2, DUAL(ALT, CHOP), ADD, CH2 INV

     HORIZONTAL SYSTEM

Sweep Time 0.2µS / DIV ~ 0.5S / DIV+3%, (+5% at x 10MAG)
Max. Sweep Rate 100nS / DIV (20nS and 50nS / DIV are uncalibrated)

     TRIGGER

Trigger Mode AUTO, NORM, TV-V, TV-H
Trigger Source CH1, CH2, ALT, LINE, EXT
Trigger Slope + or -

     X - Y OPERATION

Sensitivity 5mV ~ 5V / DIV+4%
X - axis Bandwidth DC ~ 500kHz
Phase Error 3º or less from DC ~ 50kHz

     OUTPUT SIGNAL

Trigger Signal Output Voltage:approx. 20mV / DIV into 50Ω
Bandwidth:50Hz to 5MHz (-3dB)
Impedance:Approx. 50Ω
Calibrator Output 1kHz Squarewave, 2Vpp+2%

     POWER SOURCE AC 115V / 230V + 15%, 50/60Hz

     ACCESSORIES Power cord x 1, 
Instruction manual x 1, 
Probes(10:1/1:1) x 2,

     DIMENSIONS & WEIGHT 310(W) x 150(H) x 455(D) mm;Approx. 8.5kg

Do you have a 20MHz Oscilloscope with Built-in 1MHz Function Generator that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your 20MHz Oscilloscope with Built-in 1MHz Function Generator calibrated today! Click Here!