0
Authorized Canadian Distributor & Service Centre
Your Cart
(empty)
Cart : (empty)

LCR-8230 - DC, 10Hz ~ 30MHz High-Frequency LCR Meter

DC, 10Hz ~ 30MHz High-Frequency LCR Meter

GW Instek

Category : LCR Meter

by quote only Add to Cart

Documents:
Datasheet USB Driver User's Manual Brochure

Overview
Features
Information
Calibration

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

  • Wide Test Frequency 10Hz ~ 30MHz/20MHz/10MHz/5MHz
  • 7” LCD color Display
  • 0.08% Basic Accuracy
  • Displaying Four Measurement results simultaneously from 17 selectable measurement parameters freely
  • 15 steps List Measurement
  • Two Curves Sweep Mode
  • Internal DC Bias Voltage ±12V
  • USB Storage available
  • ALC function available
  • Standard Interfaces : RS-232C, USB host/device, LAN, GPIB and Handler
  • Universal power input

General

Test FrequencyDC, 10Hz ~ 30MHz; 6 Digits, ±0.0007%
Output Impedance25Ω / 100Ω Selectable
Basic Accuracy±0.08%
Test SpeedMax: 25ms(>10kHz), Fast: 50ms(>20Hz), Medium: 100ms Slow: 300ms, Slow2: 600ms
Dimensions & Weight346 (W) X 145 (H) X 335 (D) mm; Approx. 3.3kg
Measurement ParametersMaximum four parameters can be measured and displayed at the same time Impedance (Z), Inductance (Ls / Lp), Capacitance (Cs / Cp), AC Resistance (Rs / Rp), Quality Factor (Q), Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Phase Angle (θd / θr), Susceptance (B), DC Resistance (Rdc)
InterfaceUSB/GPIB/LAN/RS-232/Handler/USB Host/TRIGGER Input
Power SourceAC 100V~240V, 50/60Hz; Consumption: 65VA (max.)
Display7" LCD color display (800x480)

Test Signal Level

AC Voltage10mV ~ 2Vrms (FREQ. ≦ 1MHz), 10mV ~ 1Vrms (FREQ. > 1MHz or FREQ. ≦ 1MHz and RO=25Ω)
AC Current100μA ~ 20mArms (RO=100Ω), 200μA ~ 40mArms (RO=25Ω)
DCR Voltage1Vdc (40mA max.)

List measurement

Listed Steps15
Listed ParametersFreq/Vac/Iac/DC Bias/Comp/BIN
Triggerauto, Repeat, Single

Sweep Measurement

Swept GraphicalTwo of measurement parameters
Swept ParametersFreq/Vac/Iac, Keep Trace

Other Functions

Auto Level Control (ALC)standard
DC Bias0 ~ ±12V
HandlerPASS, FAIL and OK, NG or BIN 1-9

Other Features

CorrectionOpen/Short/HF Load/Load
V/I MonitorVac, Iac, Vdc, Idc
ComparatorValue, Δ, Δ%
BuzzerOff, Pass, Fail
Average1 to 64

Do you have a DC, 10Hz ~ 30MHz High-Frequency LCR Meter that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your DC, 10Hz ~ 30MHz High-Frequency LCR Meter calibrated today! Click Here!