0
Authorized Canadian Distributor & Service Centre
Your Cart
(empty)
Cart : (empty)

PEL-3111H - (800V/ 52.5A/ 1050W) Single-Channel Programmable D.C. Electronic Load

Overview
Features
Information
Calibration

The PEL-3000 series, a single-channel, programmable D.C. electronic load with 0.01mA current resolution and 16A/μs current Slew Rate, is very ideal for testing server power supply and SPS (Switching Power Supply) for commercial and industrial computers. For a heavy-duty device like cloud ecosystem running 24-hour nonstop operations, a stable and high-power power supply, ranging from 175W to 1050W, is required to maintain the normal operation of server, Hub, and the equipment of data storage and internet communications. Owing to the increasing demand of data transmission and large scale data storage of telecommunications systems, the infrastructure of internet communications is in the pace of rapid expansion. This has greatly boosted the market demand of telecommunications equipment powered by power supply of 2000W and above. The flexible power combination of PEL-3000 meets the test requirements of present high-power power supply.

The PEL-3000H programmable DC Electronic load, which not only inherited functions and features from the PEL-3000 series but providing three current ranges for all PEL-3000H series and adding voltage monitor BNC terminals on the front panel. The PEL-3000H series, a single-channel, programmable D.C. electronic load with 800V and 0.84A/μs current Slew Rate, is ideal for the test of the high voltage devices such as the EV & HEV in-vehicle chargers, DC/DC converters or high-voltage batteries.

  • Operating voltage (DC):0~150V(PEL-3000)/ 0~800V(PEL-3000H)
  • Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV
  • Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)
  • Support of High Slew Rate:Max. 16A/us((PEL-3000)/ 0.84A/us(PEL-3000H)
  • Run Program Function(GO/NO GO Test)
  • Sequence Function for High Efficient Load Simulations
  • Commands are compatible with Kikusui PLZ-4W model.
  • Dynamic(Switching) Function:0.0166Hz ~20kHz
  • Soft Start Function:Off / On(1~200ms, Res:1ms)
  • Adjustable OCP / OVP / OPP / UVP Setting
  • Short Circuit Function
  • Timer function : Elapsed Time of load on
  • Cut Off Time(Auto Load Off Timer ):1s to 999h 59min 59s or Off
  • External Channel Control / Monitoring via Analog Control Connector
  • Setup Memories:100 sets
  • 3.5 Inch TFT LCD Display
  • Multi Interface : USB 2.0 Device / Host , RS-232 , GPIB (Optional)

General

Operating voltage(DC)0V~800V
Current52.5A
Power1050W
Input Range90VAC ~ 132VAC/ 180VAC ~ 250VAC Single-phase ; 47Hz~63Hz
Power(Max.)190VA
InterfaceStd: USB, RS-232, Analog Control; Opt: GPIB
Dimensions(mm) & Weight427.8(W) x 124(H) x 400.5(D), Approx. 17kg
Input Resistance3.24Ω
Minimum Operating Voltage
5V52.5A
2.5V26.25A

CC Mode

Operating Range
H0A~52.5A
M0A~5.25A
L0A~525mA
Accuracy of setting
H, M±(0.2%set+0.1%fs*1)+Vin*2/3.24MΩ
L±(0.2%set+0.1%fs)+Vin*2/3.24MΩ
Resolution
H2mA
M200μA
L20μA
Accuracy of Setting (Parallel)
H, M, L±(1.2%set+1.1%fs*3)

CR Mode

Operating Range
H10.5S~180μS(95.2mΩ~ 5.55kΩ)
M1.05S~18μS(952mΩ~ 55.5kΩ)
L105mS~1.8μS(9.52Ω~ 555kΩ)
Accuracy of setting
H, M±(0.5%set+0.5%fs*1)+Vin*2/3.24MΩ
L±(0.5%set+0.5%fs)+Vin*2/3.24MΩ
Parallel (TYP)±(1.2%set+1.1%fs*3)
Resolution
H180µS
M18µS
L1.8µS

CV Mode

Operating Range
H5V~800V
L5V~80V
Accuracy of Setting
H, L±(0.2%set+0.2%fs)
Parallel(TYP)±(0.2%set+0.2%fs)
Resolution
H20mV
L2mV

CP Mode

Operating Range
H105W~1050W
M10.5W~105W
L1.05W~10.5W
Accuracy of Setting
H, M±(0.6%set+1.4%fs)+Vin/3.24MΩ
Resolution
H100mW
M10mW
L1mW

Parallel Mode

Capacity5250W

Slew Rate

Operation ModeCC, CR
Setting Range (CC mode)
H0.840mA/μs~840mA/μs
M0.0840mA/μs~84.00mA/μs
L0.00840mA/μs~8.400mA/μs
Setting Range (CR mode)
H0.0840mA/μs~84.00mA/μs
M0.00840mA/μs~8.400mA/μs
L0.000840mA/μs~ 0.8400mA/μs
Accuracy of setting±(10% of set + 25µs)
Resolution 300μA/μs84mA~0.84A/μs
Resolution 30μA/μs8.4mA~84mA/μs
Resolution 3μA/μs840μA~8.4mA/μs
Resolution 0.3μA/μs84μA~840μA/μs
Resolution 30nA/μs8.4μA~84μA/μs
Resolution 3nA/μs0.84μA~8.4μA/μs

Meter

Voltmeter Accuracy±(0.1% red + 0.1%ƒs)
Ammeter Accuracy±(0.2% red + 0.3%ƒ.s)

Dynamic Mode

Operation modeCC, CR and CP
T1 & T20.025ms ~ 10ms: 1μs || 10ms ~ 60s : 1ms
Accuracy±100ppm of setting
Slew Rate Setting Range (CC mode)
H0.840mA/µs ~ 840.0mA/µs
M0.084mA/µs ~ 84.00mA/µs
L0.0084mA/µs ~ 8.400mA/µs
Slew Rate Setting Rage (CR mode)
H0.084mA/µs ~ 84.00mA/µs
M0.0084mA/µs ~ 8.400mA/µs
L0.00084mA/µs ~ 0.8400mA/µs
Current Accuracy±0.4%F.S.

Protection Functions

FunctionsOvervoltage protection(OVP), Overcurrent protection(OCP), Overpower protection(OPP), Overheat protection(OHP), Undervoltage protection(UVP), Reverse connection protection(REV)

Do you have a (800V/ 52.5A/ 1050W) Single-Channel Programmable D.C. Electronic Load that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your (800V/ 52.5A/ 1050W) Single-Channel Programmable D.C. Electronic Load calibrated today! Click Here!