AFG-2125 - 25MHz Arbitrary Waveform Function Generator with Sweep Mode, AM/FM/FSK Modulation & Ext. Counter
Overview
Features
Information
Calibration
The AFG-2100/2000 Series Arbitrary Function Generator is a DDS (Direct Digital Synthesized) based signal generator designed to accommodate the Educational and Basic Industrial requirements for an accurate and affordable signal source covering the output of Sine, Square (Pulse), Ramp (Triangle), Noise and Arbitrary waveforms. The 20M Sa/s sampling rate, 10 bit vertical resolution and 4k point memory of the AFG-2100/2000 Series provide user with a flexible environment for creating the specific waveform output as needed. The 0.1Hz resolution of Sine, Square and Triangle waveforms and the 1% ~ 99% adjustable duty cycle of Square (Pulse) waveform are the remarkable features to greatly extend its application range in various fields.
The AFG-2100/2000 Series includes 6 models in three frequency bands of 5MHz, 12MHz and 25MHz. Besides the basic features of the whole AFG-2100/2000 Series, AFG-2100 also carries additional features of AM/FM/FSK Modulation, Sweep, and Frequency Counter.
The user friendly interface of AFG-2100/2000 Series allows user to set waveform parameters, including waveform type, frequency, amplitude, DC offset, modulation type, and duty cycle, through keypad entry and/or the knob selection, and display the set parameters on the 3.5” LCD screen. The AFG-2100/2000 Series is equipped with a USB Device interface for remote control and waveform editing through a PC. A waveform editing software is provided to facilitate the waveform creation on the PC. After the waveform editing is done, the user is able to download the waveform data from PC to the AFG-2100/2000 Series for signal output.
- Wide Frequency Ranges From 1μHz to 25MHz (sine/square wave)
- 1 μHz Resolution in Full Range
- Built-in Standard 120MSa/s, 10bit, 4k Points Arbitrary Waveform for Both Channels
- True Dual-Channel Output, CH2 Provides the Same Characteristics as CH1
- Couple, Tracking, Phase Operations of Dual Channel are Supported
- 1% ~ 99% Adjustable Duty Cycle for Square Waveform
- High Resolution and Colored TFT LCD with Friendly User Interface
- Multiple Editing methods to Edit Arbitrary Waveform Easily
- Built-in Standard AM/FM/PM/FSK/SUM/Sweep/Burst and Frequency Counter
- USB Host/Device Interface for Remote Control and Waveform Editing
Waveforms
| Sine, Square, Ramp, Noise(Normal Type), Arbitrary Waveform |
Arbitrary Waveform
| Sample Rate | 20 MSa/s |
| Repetition Rate | 10MHz |
| Waveform Length | 4k points |
| Amplitude Resolution | 10 bit |
| Non-Volatile Memory | 4k points |
Frequency Characteristics
| Range Sine, Square | 0.1Hz ~ 25MHz |
| Range Ramp | 0.1Hz ~ 1MHz |
| Resolution Sine, Square, Ramp | 0.1Hz |
| Accuracy Stability | ±20 ppm |
| Accuracy Aging | ±1 ppm, per 1 year |
| Accuracy Tolerance | ≦ 1mHz |
Waveforms
| Sine, Square, Ramp, Noise(Normal Type), Arbitrary Waveform |
Arbitrary Waveform
| Sample Rate | 20 MSa/s |
| Repetition Rate | 10MHz |
| Waveform Length | 4k points |
| Amplitude Resolution | 10 bit |
| Non-Volatile Memory | 4k points |
Frequency Characteristics
| Amplitude Range | 1 mVpp to 10 Vpp( into 50Ω), 0.1Hz～20MHz 2 mVpp to 20 Vpp(open-circuit) , 0.1Hz～20MHz 1 mVpp to 5 Vpp( into 50Ω), 20MHz～25MHz 2 mVpp to 10 Vpp(open-circuit), 20MHz～25MHz |
| Amplitude Accuracy | ± 2% of setting ±1 mVpp (at 1 kHz,>10 mVpp) |
| Amplitude Resolution | 1 mV or 3 digits |
| Amplitude Flatness | ± 1% (0.1dB) ≦100kHz ± 3% (0.3 dB) ≦5MHz ± 4% (0.4 dB) ≦12MHz ± 20% (2 dB) ≦20MHz ± 5% (0.4 dB) ≦25MHz (sine wave relative to 1 kHz) |
| Amplitude Units | Vpp, Vrms, dBm |
| Offset Range | ±5 Vpk ac +dc (into 50Ω) ±10Vpk ac +dc (Open circuit) ±2.5 Vpk ac +dc (into 50Ω) for 20MHz-25MHz ±5Vpk ac +dc (Open circuit) for 20MHz-25MHz |
| Offset Accuracy | 2% of setting + 5 mV+ 0.5% of amplitude |
| Output Impedance | 50Ω typical (fixed) > 300kΩ (output disabled) |
| Output Protection(main output) | Short-circuit protected by overload relay automatically disables output |
| Sync Output Level | TTL-compatible into>1kΩ |
| Sync Output Impedance | 50Ω nominal |
| Sync Output Rise or Fall Time | ≦25ns |
| Sine wave Characteristics (Harmonic Distortion) |
-55 dBc DC ~ 200kHz, Ampl > 0.1Vpp -50 dBc 200kHz ~ 1MHz, Ampl > 0.1Vpp -35 dBc 1MHz ~ 5MHz, Ampl > 0.1Vpp -30 dBc 5MHz ~ 25MHz, Ampl > 0.1Vpp |
| Square wave Characteristics (Rise/Fall Time) |
≦25ns at maximum output (into 50Ωload) |
| Square wave Characteristics (Overshoot) |
< 5% |
| Square wave Characteristics (Asymmetry) |
1% of period+1 ns |
| Square wave Characteristics (Variable Duty Cycle) |
1.0% to 99.0% ≦ 100kHz 20.0% to 80.0% ≦ 5 MHz 40.0% to 60.0% ≦10MHz 50% ≦ 25MHz |
| Ramp Characteristics (Linearity) |
＜ 0.1% of peak output |
| Ramp Characteristics (Variable Symmetry) |
0% to 100%(0.1% Resolution) |
AM Modulation
| Carrier Waveforms | Sine, Square, Triangle |
| Modulating Waveforms | Sine, Square, Triangle |
| Modulating Frequency | 2 mHz to 20 kHz (Int) DC to 20KHz (Ext) |
| Depth | 0% to 120.0% |
| Source | Internal / External |
FM Modulation
| Carrier Waveforms | Sine, Square, Triangle |
| Modulating Waveforms | Sine, Square, Triangle |
| Modulating Frequency | 2 mHz to 20 kHz (Int) DC to 20KHz (Ext) |
| Deviation | DC to Max Frequency |
| Source | Internal / External |
Sweep
| Waveforms | Sine, Square, Triangle |
| Type | Linear or Logarithmic |
| Start F / Stop F | 0.1Hz to Max Frequency |
| Sweep Time | 1 ms to 500 s |
| Source | Internal / External |
FSK
| Carrier Waveforms | Sine, Square, Triangle |
| Modulating Waveforms | 50% duty cycle square |
| Internal Rate | 2MHz~20KHz |
| Frequency Range | 0.1Hz~Max Frequency |
| Source | Internal / External |
Frequency Counter
| Range Sine, Square | 0.1Hz ~5MHz |
| Range Ramp | 0.1Hz ~ 1MHz |
| Resolution Sine, Square, Ramp | 0.1Hz |
| Accuracy Stability | ± 20 ppm |
| Accuracy Aging | ± 1 ppm, per 1 year |
| Accuracy Tolerance | ≤ 1 mHz |
Other Specifications
| Store/Recall | 10 Groups of Setting Memories |
| Interface | USB (Device) |
| Power Source | AC100 ~ 240V, 50 ~ 60Hz |
| Power Consumption | 65VA |
| Dimensions & Weight | 266(W) x 107(H) x 293(D) mm, 3.2 kg |
Output Characteristics
| Amplitude Range | 1 mVpp to 10 Vpp( into 50Ω), 0.1Hz～20MHz 2 mVpp to 20 Vpp(open-circuit) , 0.1Hz～20MHz 1 mVpp to 5 Vpp( into 50Ω), 20MHz～25MHz 2 mVpp to 10 Vpp(open-circuit), 20MHz～25MHz |
| Amplitude Accuracy | ± 2% of setting ±1 mVpp (at 1 kHz,>10 mVpp) |
| Amplitude Resolution | 1 mV or 3 digits |
| Amplitude Flatness | ± 1% (0.1dB) ≦100kHz ± 3% (0.3 dB) ≦5MHz ± 4% (0.4 dB) ≦12MHz ± 20% (2 dB) ≦20MHz ± 5% (0.4 dB) ≦25MHz (sine wave relative to 1 kHz) |
| Amplitude Units | Vpp, Vrms, dBm |
| Offset Range | ±5 Vpk ac +dc (into 50Ω) ±10Vpk ac +dc (Open circuit) ±2.5 Vpk ac +dc (into 50Ω) for 20MHz-25MHz ±5Vpk ac +dc (Open circuit) for 20MHz-25MHz |
| Offset Accuracy | 2% of setting + 5 mV+ 0.5% of amplitude |
| Output Impedance | 50Ω typical (fixed) > 300kΩ (output disabled) |
| Output Protection(main output) | Short-circuit protected by overload relay automatically disables output |
| Sync Output Level | TTL-compatible into>1kΩ |
| Sync Output Impedance | 50Ω nominal |
| Sync Output Rise or Fall Time | ≦25ns |
| Sine wave Characteristics (Harmonic Distortion) |
-55 dBc DC ~ 200kHz, Ampl > 0.1Vpp -50 dBc 200kHz ~ 1MHz, Ampl > 0.1Vpp -35 dBc 1MHz ~ 5MHz, Ampl > 0.1Vpp -30 dBc 5MHz ~ 25MHz, Ampl > 0.1Vpp |
| Square wave Characteristics (Rise/Fall Time) |
≦25ns at maximum output (into 50Ωload) |
| Square wave Characteristics (Overshoot) |
< 5% |
| Square wave Characteristics (Asymmetry) |
1% of period+1 ns |
| Square wave Characteristics (Variable Duty Cycle) |
1.0% to 99.0% ≦ 100kHz 20.0% to 80.0% ≦ 5 MHz 40.0% to 60.0% ≦10MHz 50% ≦ 25MHz |
| Ramp Characteristics (Linearity) |
＜ 0.1% of peak output |
| Ramp Characteristics (Variable Symmetry) |
0% to 100%(0.1% Resolution) |
AM Modulation
| Carrier Waveforms | Sine, Square, Triangle |
| Modulating Waveforms | Sine, Square, Triangle |
| Modulating Frequency | 2 mHz to 20 kHz (Int) DC to 20KHz (Ext) |
| Depth | 0% to 120.0% |
| Source | Internal / External |
FM Modulation
| Carrier Waveforms | Sine, Square, Triangle |
| Modulating Waveforms | Sine, Square, Triangle |
| Modulating Frequency | 2 mHz to 20 kHz (Int) DC to 20KHz (Ext) |
| Deviation | DC to Max Frequency |
| Source | Internal / External |
Sweep
| Waveforms | Sine, Square, Triangle |
| Type | Linear or Logarithmic |
| Start F / Stop F | 0.1Hz to Max Frequency |
| Sweep Time | 1 ms to 500 s |
| Source | Internal / External |
FSK
| Carrier Waveforms | Sine, Square, Triangle |
| Modulating Waveforms | 50% duty cycle square |
| Internal Rate | 2MHz~20KHz |
| Frequency Range | 0.1Hz~Max Frequency |
| Source | Internal / External |
Frequency Counter
| Range | 10 Groups of Setting Memories |
| Accuracy | Time Base accuracy |
| Time Base | ±20ppm (23˚C ± 5˚C) after 30 minutes warm up |
| Resolution | The maximum resolution is: 100nHz, 0.1Hz for 100MHz |
| Input Impedance | 1MΩ/150pf |
| Sensitivity | ≤35mVrms(5Hz~100MHz) ; ≤45mVrms(100MHz~150MHz) |
Other Specifications
| Store/Recall | 10 Groups of Setting Memories |
| Interface | USB (Device) |
| Power Source | AC100 ~ 240V, 50 ~ 60Hz |
| Power Consumption | 65VA |
| Dimensions & Weight | 266(W) x 107(H) x 293(D) mm, 3.2 kg |
Do you have a 25MHz Arbitrary Waveform Function Generator with Sweep Mode, AM/FM/FSK Modulation & Ext. Counter that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your 25MHz Arbitrary Waveform Function Generator with Sweep Mode, AM/FM/FSK Modulation & Ext. Counter calibrated today! Click Here!Recommended Accessories for the 25MHz Arbitrary Waveform Function Generator with Sweep Mode, AM/FM/FSK Modulation & Ext. Counter
USB Cable, USB 2.0, A-B Type, 1200mm
