0
Authorized Canadian Distributor & Service Centre
Your Cart
(empty)
Cart : (empty)

GFG-8210 - 10MHz Function Generator

10MHz Function Generator

GW Instek

Category : Function Generators

by quote only Add to Cart

Documents:
Datasheet

Overview
Features
Information
Calibration

GFG-8210:Frequency Range: 0.1Hz~10MHz - Waveforms: Sine, Triangle, Square, Ramp, TTL and CMOS Output - External Voltage Controlled Frequency (VCF) Function - Duty Cycle Control with Signal Inversion Capability - Variable DC Offset Control - Two-Step (-20Bx2) and Variable Attenuator - Built-in 6 Digit Counter with INT/EXT Function Up to 150MHz/High Resolution - LIN/LOG Sweep Mode - Sweep Output

  • Frequency Range:0.1Hz ~ 10MHz
  • Waveforms:Sine, Triangle, Square, Ramp, TTL and  CMOS  Output
  • External Voltage Controlled Frequency (VCF) Function
  • Duty Cycle Control with Signal Inversion Capability
  • Variable DC Offset Control
  • Two-Step (-20dBx2) and Variable attenuator
  • Built-in 6 Digit Counter with INT/EXT Function up to 150MHz / high resolution
  • LIN/LOG Sweep Mode
  • Sweep Output
Main
Frequency Range 0.1Hz ~ 10MHz (8 ranges)
Amplitude >10Vp-p (into 50Ω load)
Impedance 50Ω+10%
Attenuator -20dB+1dB x 2
DC Offset <-5V ~ >5V( into 50Ω load)
Duty Control 15% : 85% : 15% to  1MHz Continue variable (square wave only)
Display 6 digits LED display
Sine Wave
Distortion 1% typical
Flatness + 0.45dB (+5%)
Triangle Wave  
Linear >98%  to 100kHz
Square Wave
Symmetry +2%, 1Hz ~ 100kHz
Rise or Fall Time < 35nS
CMOS Output  
Max. Frequency 2MHz
Level <4Vpp ~ 14.5Vpp+0.5Vpp adjustable
Rise or Fall Time <120nS
TTL Output
Level >3Vpp
Rise or Fall Time <20nS
VCF  
Input Voltage 0V~10V ± 1V(100 : 1)
Input Impedance 10kΩ ±10%
Sweep Operation
Sweep/Manual Switch selector
Sweep/Rate >100 : 1 ratio max. and adjustable
Sweep/Time 0.5sec. ~ 30sec. adjustable
Sweep/Mode Lin./Log. switch selector
Sweep/Out 0V ~ 10+1V
Frequency Counter
INT./EXT. Switch selector
Range 0.1Hz ~ 10MHz (5Hz ~ 150MHz EXT.)
Accuracy Timebase accuracy ±1 count
Timebase ±20ppm (23°C±5°C) after 30 minutes warm up
Resolution The maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz
Input Impedance 1MΩ//150pF
Power Source AC 115V/230V±15%, 50/60Hz
Accessories Power cord × 1,
Instruction manual × 1, 
GTL-101 × 2
Dimensions & Weight 251(W) × 91(H) × 291(D) mm, Approx. 2.2 kg

Do you have a 10MHz Function Generator that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your 10MHz Function Generator calibrated today! Click Here!