0

Browse Products

View Promotions

GW Instek Canada

Almost 40 years of manufacturing innovative products, GW Instek is widely accepted worldwide.With an overriding commitment to provide highly durable products, GW Instek is your most Reliable choice when it comes to selecting the best measurement instruments with the lowest Total Cost per Ownership (TCO). Highly durable products mean long product lifetime capable of reducing operation & maintenance costs. This is definitely what you need to consider before investing.

Featured Products

GDS-2074A - 70 MHz Digital Storage Oscilloscope

The GDS-2000A Series Digital Storage Oscilloscope offers 2 and 4-channel configurations and wide bandwidth selections, including 300MHz, 200MHz, 100MHz and 70MHz. Each model provides 2GSa/s maximum real-time sampling rate, 2Mega point maximum record length and 100GSa/s high-speed equivalent-time sampling rate. Equipped with an 8-inch 800*600 high-resolution TFT LCD display, 1mV/div to 10V/div vertical range and 1ns/div to 100s/div time base, the GDS-2000A series is able to faithfully demonstrate waveforms of complicated and obscure signals.

$2,127 (CAD)
$1,434 (USD)

Add to Cart
Details

PSU-01A - 2U Size Handles x 2, Plates x 2

2U Size Handles x 2, Plates x 2

$148 (CAD)
$100 (USD)

Add to Cart
Details

APS-1102 - Programmable A.C./ D.C. Power Source

Need an Arbitrary Waveform Power Source? No Problem!
The APS-1102 is not only in the role as a precision AC/DC power source but also a powerful analyzer, containing abundant features for the testing and characteristic analysis of power supplies, electronic devices, components and modules. Besides providing AC/DC power, APS-1102 also allows free programming of outputs for the simulation of a power source with abnormal variations. The instantaneous interruption, frequency sweeping, voltage sweeping, and arbitrary waveforms of power source can be easily generated in accordance with the test requirements. The output function includes two main modes, AC and AC + DC. Each mode can be combined with any of the four signal sources, internal (INT), external (EXT), internal + external (ADD), and synchronization, to give an ultimate flexibility of power source setting. APS-1102 includes a multi-functional and user-friendly software, which supports the remote control of panel operations, Sequence editing and execution, Arbitrary waveform editing and transfer, and Data logging via USB interface. With capacity of 1kVA power and weighting of 20 lbs, APS-1102 provides powerful test and analysis features all in a comparatively compact and light-weight box.

$5,316 (USD)

Add to Cart
Details

PSW 160-14.4 - 720W Programmable Switching D.C. Power Supply (Multi-Range)

The PSW 160-14.4 is a single output multi-range programmable switching DC Power Supply covering a power range up to 720W. The multi-range feature allows the flexible and efficient configuration of voltage and current within the rated power range. As the PSW 160-14.4 can be connected in series for maximum 2 units or in parallel for maximum 3 units, the capability of connecting multiple PSW units for higher voltage or higher current output provides a broad coverage of applications. With the flexibility of multi-range power utilization and series/parallel connection, the PSW 160-14.4 significantly reduces the user’s investment for various power supply products to accommodate the projects with different power requirements.

$2,559 (CAD)
$1,898 (USD)

Add to Cart
Details

GBS-1204 - 4-channel Digital Storage Oscilloscope

The GBS-1000 series, an economical selection of the four-channel DSO, offers three frequency ranges including 200,100, and 70MHz, real time sampling rate of 1 GSa/s, equivalent time sampling rate of 25GSa/s and 25k points memory depth.

The GBS-1000 series has numerous features including 5.7” TFT color LCD display, 27 automatic measurements, FFT and FFTrms tests, 12-graticule horizontal display, Go/NoGo for predefined conditions, and flexible interface selections such as USB and RS 232. By using the USB interface, users can save waveform images and waveform data as well as carry out waveform printout. The diversified features have made the GBS-1000 series the number one choice of the economical four-channel oscilloscope.

by quote only

Add to Cart
Details

PSW 800-2.88 - 720W Programmable Switching D.C. Power Supply (Multi-Range)

The PSW 250-4.5 is a single output multi-range programmable switching DC Power Supply covering a power range up to 360W. The multi-range feature allows the flexible and efficient configuration of voltage and current within the rated power range. As the PSW 250-4.5 can be connected in parallel for maximum 3 units, the capability of connecting multiple PSW units for higher voltage or higher current output provides a broad coverage of applications. With the flexibility of multi-range power utilization and parallel connection, the PSW 250-4.5 significantly reduces the user’s investment for various power supply products to accommodate the projects with different power requirements.

$3,507 (CAD)
$2,420 (USD)

Add to Cart
Details

GDM-8342GP - 50,000 Counts Digit Dual Measurement Multimeter with GPIB interface

GW INSTEK rolls out a new generation precision Dual Measurement Multimeters – the GDM-8341 and GDM-8342 are 50,000 count, [VFD] Vacuum Fluorescent Dual display, 0.02% DC accuracy Multimeters in a Bench-style form factor that emphasize greater productivity for the user.

$809 (CAD)
$600 (USD)

Add to Cart
Details

GRF-1300A - Communication Trainer

GW Instek GSP-730 is a 3 GHz Spectrum Analyzer mainly developed to fulfill the demands of RF Communication educations. Budget constraint and insufficient teaching tools are normally the two hurdles for schools to provide high-quality courses for RF communication experiments. A moderate spectrum analyzer, GSP-730, featuring full functions should provide, along with GRF-1300 training kit possesses a unique position in the field as an economic turn-key solution for 3GHz RF Communication Experiment courses.

$590 (USD)

Add to Cart
Details

New Products

LCR-8230 - DC, 10Hz ~ 30MHz High-Frequency LCR Meter

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

by quote only

Add to Cart
Details

GPT-12004 - AC 200VA AC/DC/IR/GB Electrical Safety Analyzer

GW Instek introduces the flagship model (200VA output capacity) safety analyzer-the GPT-12000 series, which is the first safety analyzer in the world to comply with IEC 61010-2-034 (Safety requirement for electrical requirement for measurement, control and laboratory use – particular requirements for measurement equipment for insulation resistance and test equipment for electric strength), which stipulates that the requirements of the software and hardware interfaces must be followed while designing high voltage and insulation resistance test and measurement instruments so as to ensure that users are provided with necessary protection and warning while using the instruments.

by quote only

Add to Cart
Details

GPT-12003 - AC 200VA AC/DC/IR Electrical Safety Analyzer

GW Instek introduces the flagship model (200VA output capacity) safety analyzer-the GPT-12000 series, which is the first safety analyzer in the world to comply with IEC 61010-2-034 (Safety requirement for electrical requirement for measurement, control and laboratory use – particular requirements for measurement equipment for insulation resistance and test equipment for electric strength), which stipulates that the requirements of the software and hardware interfaces must be followed while designing high voltage and insulation resistance test and measurement instruments so as to ensure that users are provided with necessary protection and warning while using the instruments.

by quote only

Add to Cart
Details

GSP-818 - 1.8GHz

GSP-818 is a new general spectrum analyzer, which supports a frequency range of 1.8 GHz and provides testing requirements for RF products during the development/production phases. GSP-818 has a built-in 20dB amplifier and provides an adjustable range of resolution bandwidth (RBW) from 10Hz to 3MHz. In addition, it has the AM/FM signal demodulation function and the ACPR/OCBW/CHPW test functions to meet the requirements of general RF signal measurement.

by quote only

Add to Cart
Details

LCR-8205 - DC, 10Hz ~ 5MHz High-Frequency LCR Meter

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

by quote only

Add to Cart
Details

GPT-12002 - AC 200VA AC/DC Withstanding Voltage Electrical Safety Analyzer

GW Instek introduces the flagship model (200VA output capacity) safety analyzer-the GPT-12000 series, which is the first safety analyzer in the world to comply with IEC 61010-2-034 (Safety requirement for electrical requirement for measurement, control and laboratory use – particular requirements for measurement equipment for insulation resistance and test equipment for electric strength), which stipulates that the requirements of the software and hardware interfaces must be followed while designing high voltage and insulation resistance test and measurement instruments so as to ensure that users are provided with necessary protection and warning while using the instruments.

by quote only

Add to Cart
Details

LCR-8220 - DC, 10Hz ~ 20MHz High-Frequency LCR Meter

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

by quote only

Add to Cart
Details

LCR-8210 - DC, 10Hz ~ 10MHz High-Frequency LCR Meter

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

by quote only

Add to Cart
Details

Clearance Products

GWM-037 - Clamp Meter

DC/AC Current up to 1000 Amp
True RMS (DC+AC) AC Current Measurement
True RMS AC Voltage Measurement
True RMS Power Measurement
Frequency Measurement
Resistance Measurement
Peak Detect and Data Hold
Analog Output of Current Signal for Recorder

$195 (USD)

Add to Cart
Details

PSH-1036A - 360W Programmable Switching DC Power Supply

Wide Input Range and High Power Factor (P.F)
High Efficiency and High Power Density
Constant Voltage and Constant Current Operation
Over-Voltage, Over-Current and Over-Heat Protection
Low Ripple and Noise
Option : GPIB (IEEE-488.2) & RS-232
Output ON / OFF Control
Self-Test and Software Calibration
LCD Display
Built-in Buzzer alarm
(Note: GPIB and RS-232C cannot be installed simultaneously)

$866 (USD)

Add to Cart
Details

GPR-7550 - 375W DC Power Supply

0.01% High Regulation
Constant Voltage and Constant Current Operation
Low Ripple and Noise
Continuous / Dynamic Load Can be Selected
Overload and Reverse Polarity Protection

$499 (USD)

Add to Cart
Details

GCM-01 - Insulation Test Unit (for use with GCM-036)

AC/DC Voltage, AC Current, Resistance Audible Continuity Check and Insulation test
1000A High Current Range
0.5% DCV Accuracy
50ø Clamp Jaws

$45 (USD)

Add to Cart
Details

GPI-825 - AC VA Withstand Voltage/Insulation Tester

Instek GPI-825: 100VA AC Output - True RMS Current Readback - 3 Ranges of Adjustable Cut Off Current - Digital Display for Voltage, Current and Timer at Same Time - Zero Turn-On Operating Switch (for GPT-805, GPT-815, GPI-825) - Automatic FAIL Indicator of Alarm Lamp and Buzzer - 9 Pin Remote Control for START, RESET - General Input Power Acceptable - Voltage Output Adjustable During Test Period - Arc Detection - Easy Operation

$916 (USD)

Add to Cart
Details

PSH-1070A - 700W Programmable Switching DC Power Supply

Wide Input Range and High Power Factor (P.F)
High Efficiency and High Power Density
Constant Voltage and Constant Current Operation
Over-Voltage, Over-Current and Over-Heat Protection
Low Ripple and Noise
Option : GPIB (IEEE-488.2) & RS-232
Output ON / OFF Control
Self-Test and Software Calibration
LCD Display
Built-in Buzzer alarm
(Note: GPIB and RS-232C cannot be installed simultaneously)

$1,443 (USD)

Add to Cart
Details

GCM-035 - Digital Clamp Meter

AC Current, AC Voltage, Resistance Measurement and Audible Continuity Check
Data hold
One Hand Easy Operation
42ø

$50 (USD)

Add to Cart
Details

SFG-1013 - 3MHz DDS Function Generator with Voltage Display

The SFG-1000 Series, an economic function generator with high accuracy and high stability output, are designed based on the DDS (Direct Digital Synthesized) technology embedded in a large scale FPGA.

The 3MHz frequency range and the output waveform selection of Sine, Square, Triangle and TTL available in the SFG-1000 Series adequately provide the fundamental functions to ensure high confidence in test results. The DDS technology at an affordable price gives a high value solution to the users who need a signal source for accurate but simple measurement applications.

$332 (CAD)
$200 (USD)

Add to Cart
Details

Accessories

GCP-530 - Current Probe for GDS-3000

GCP-530 50MHz/30A Current Probe for GDS-3000

$4,376 (CAD)
$2,950 (USD)

Add to Cart
Details

GTP-070A-4 - Oscilloscope Probe, 70MHz (10:1/1:1) Switching Passive Probe, BNC(P/M)

GTP-070A-4 10:1 / 1:1 70MHz for GDS-1052-U / 1072-U / 1072A-U

$30 (USD)

Add to Cart
Details

GCP-201 - Signal Grippers

GCP-201 Signal Grippers for GSP-810/827/830

$171 (CAD)
$115 (USD)

Add to Cart
Details

GRA-405 - 19" 4U Mounting Rack for GDS-2000 Series

GRA-405 19In, 4U Rack Mounting * For GDS-2000 Series

$371 (CAD)
$250 (USD)

Add to Cart
Details

ADP-101 - Adaptor BNC ~ BNC for GSP-800 Series

ADP-101 Adaptor BNC ~ BNC for GSP-800 Series

$319 (CAD)
$210 (USD)

Add to Cart
Details

GDM-8261 (opt.3) - LAN Interface Card for GDM-8261A

LAN Interface Card GDM-8261A

$300 (USD)

Add to Cart
Details

GSC-010 - Carrying Case for GDS-200/300 Series

GSC-010 Carrying case for GDS-200/300 Series

$82 (CAD)
$55 (USD)

Add to Cart
Details

DS2-16LA - 16 Channel Logic Analyzer Option

GDS-2000A Series 16 Channel Logic Analyzer Option

$1,231 (CAD)
$830 (USD)

Add to Cart
Details