0
Authorized Canadian Distributor & Service Centre
Your Cart
(empty)
Cart : (empty)

GSP-9330TG - 3.25 GHz Spectrum Analyzer with Tracking Generator

3.25 GHz Spectrum Analyzer with Tracking Generator

GW Instek

Category : Spectrum Analyzers

$10,088 (CAD)
$6,800 (USD)
Add to Cart

Documents:
Users Manual Brochure Datasheet

Overview
Features
Information
Calibration

TESTS MUST BE FAST!

The brand new GSP-9330, a high test speed spectrum analyzer with 3.25 GHz, provides the fastest 204 μs sweep speed. Users, via high speed sweep time, can easily handle and analyze modulation signals.  The keys to handling modulated signals are fast sweep time and signal demodulation functions.  In addition to the analog AM/FM demodulation and analysis function, GSP-9330 also provides digital signal ASK/FSK, and 2FSK demodulation and analysis capabilities. Nowadays, EMC issues are very crucial to product's design processes. Therefore, GSP-9330 has incorporated the EMC pretest solution to facilitate EMC tests.  The simple and easy EMC pretest procedures from GSP-9330 can tremendously shorten users' product launch timeline.
 

Fastest Sweep Speed Up to 204us

For measuring signals, speed is one of the specifications to be considered. Perhaps, it is the most important specification. GSP-9330 provides sweep speed up to 204 μs.  Users, via high speed sweep time, can easily capture transient signals such as Tire-pressure monitoring system (TPMS), frequency/amplitude modulation signals, Bluetooth frequency hopping signals, tuned oscillator or other interfering signals under ISM Band.
 

Modulation Signal Analysis and Processing

The keys to handling modulated signals are fast sweep time and signal demodulation function.  In addition to the analog AM/FM demodulation and analysis function, GSP-9330 also provides ASK/FSK digital signal demodulation capability. For the widely-utilized, low-cost and low power consumption 2FSK modulation signals, GSP-9330 also provides the complete test and analysis function to address the requirements.


 

EMC Pretest Solution 

GSP-9330 can meet customers’ EMC pretest requirements on the product development and verification stages. Users can detect and resolve problems at the early product development stage that can save time and money for product development and verification fee.  As a result, users can expedite the process of products launch.  GSP-9330 has the built-in EMI dedicated 200/9 k/120 k/1 MHz filter, 20 dB low noise amplifier and Quasi-Peak/Average detection mode to conduct radiation and conduction tests after collocating with the probe set.

GKT-008, the radiation test probe set, provides a complete near field test probe set to simplify the complex measurement procedures and to simulate 3m/10m far field tests from the labs. Using GKT-008 can greatly save engineers’ debugging time and the money for going back and forth to the labs. GKT-008 can collocate with the Tracking Generator function of GSP-9330 to conductEMSpretests. 

For conduction tests, GKT-008 can collocate with LISN and Isolated Transformer to conduct electromagnetic conduction tests. If users concern EUT’s large voltage variation or complexity, applying a Transient Limiter will make test equipment safer.

  • Frequency Range: 9kHz ~ 3.25GHz
  • 0.025ppm Frequency Stability and 1ppm aging Rate
  • RBW: 1Hz ~ 1MHz (3dB), 6dB EMI Filter: 200Hz, 9kHz, 120kHz, 1MHz
  • Fastest sweep time: 204us
  • Sensitivity: -149 dBm/Hz (@PreAmp on)
  • Built-in Preamplifier, 50dB Attenuator, and Sequence Function
  • Built-in EMC pretest function, Quasi-Peak/Average EMI detect mode
  • Built-in 2FSK Analysis, AM/FM/ASK/FSK Demodulation & Analysis
  • Built-in P1dB point, Harmonic, CHPW, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO, N-dB bandwidth, Noise Marker, Frequency Counter, TDP, Gated Sweep
  • Built-in Spectrogram, Topographic and Split-Window Display Modes
  • Remote control EMI measurement software: SpectrumShot
  • Remote Control Interface: LAN, USB, RS-232
  • Options: Tracking Generator, GPIB Interface, Battery Pack

Frequency

Frequency

Range 9 kHz to 3.25 GHz
Resolution 1 Hz

Frequency Reference

Accuracy ±(period since last adjustment X aging rate) + stability over temperature + supply voltage stability
Aging Rate
±1 ppm max. 1 year after last adjustment
Frequency Stability over Temperature
±0.025 ppm 0 to 50 °C
Supply Voltage Stability ±0.02 ppm

Frequency Readout Accuracy

Start, Stop, Center, Marker ±(marker frequency indication X frequency reference accuracy + 10% x RBW + frequency resolution)
Trace points Max 601 points, min 6 points

Marker Frequency Counter

Resolution 1 Hz, 10 Hz, 100 Hz, 1 kHz
Accuracy
±(marker frequency indication X frequency reference accuracy + counter resolution) RBW/Span >=0.02 ; Mkr level to DNL>30 dB

Frequency Span

Range 0 Hz (zero span), 100 Hz to 3.25 GHz
Resolution 1 Hz
Accuracy
± frequency resolution1 RBW: Auto;

Phase Noise

Offset from Carrier Fc =1 GHz; RBW = 1 kHz, VBW = 10 Hz; Average ≥ 40
10 kHz
<-88 dBc/Hz Typical
100 kHz
<-95 dBc/Hz Typical
1 MHz
<-113 dBc/Hz Typical

Resolution Bandwidth (RBW) Filter

Filter Bandwidth
1 Hz to 1 MHz in 1-3-10 sequence -3dB bandwidth
200 Hz, 9 kHz, 120 kHz, 1MHz -6dB bandwidth
Accuracy
± 8%, RBW = 1MHz Nominal
± 5%, RBW < 1MHz Nominal
Shape Factor
< 4.5:1 Normal Bandwidth ratio: -60dB:-3dB

Video Bandwidth (VBW) Filter

Filter Bandwidth
1 Hz to 1 MHz in 1-3-10 sequence -3dB bandwidth

Amplitude

Amplitude Range

Measurement Range
100 kHz to 1 MHz Displayed Average Noise Level (DANL) to 18 dBm
1 MHz to 10 MHz DANL to 21 dBm
10 MHz to 3.25 GHz DANL to 30 dBm

Attenuator

Input Attenuator Range
0 to 50 dB, in 1 dB step Auto or manual setup

Maximum Safe Input Level

Average Total Power
≤ +33 dBm Input attenuator ≥10 dB
DC Voltage ± 50 V

1 dB Gain Compression

Total Power at 1st Mixer
> 0 dBm Typical;Fc ≥ 50 MHz; preamp. off
Total Power at the Preamp
> -22 dBm Typical;Fc ≥ 50 MHz; preamp. on
mixer power level (dBm)= input power (dBm)-attenuation (dB)

Displayed Average Noise Level (DANL)

Preamp off 0 dB attenuation; RF Input is terminated with a 50Ω load. RBW 10 Hz; VBW 10 Hz; span 500 Hz; reference level = -60dBm; trace average ≥ 40
9 kHz to 100 kHz
< -93 dBm Nominal
100 kHz to 1 MHz
< -90 dBm - 3 x (f/100 kHz) dB Nominal
1 MHz to 2.7 GHz
< -122 dBm Nominal
2.7 GHz to 3.25 GHz
< -116 dBm Nominal
Preamp on 0 dB attenuation; RF Input is terminated with a 50Ω load ; RBW 10 Hz; VBW 10Hz; span 500 Hz; reference level = -60dBm; trace average ≥ 40
100 kHz to 1 MHz
< -108 dBm - 3 x (f/100 kHz) dB Nominal
1 MHz to 10 MHz
< -142 dBm Nominal
10 MHz to 3.25 GHz
< -142 dBm + 3 x (f/1 GHz) dB Nominal

Level Display Range

Scales Log, Linear
Units dBm, dBmV, dBuV, V, W
Marker Level Readout
0.01 dB Log scale
0.01 % of reference level Linear scale
Level Display Modes
Trace, Topographic, Spectrogram Single / split Windows
Number of Traces 4
Detector
Positive-peak, negative-peak, sample, normal, RMS(not Video), Average(EMI), Quasi-Peak(EMI) Can be setup for each trace separately
Trace Functions Clear & Write, Max/Min Hold, View, Blank, Average

Absolute Amplitude Accuracy

Absolute Point Center=160 MHz ; RBW 10 kHz; VBW 1 kHz; span 100 kHz; log scale; 1 dB/div; peak detector; 23°C±1°C; Signal at Reference Level
Preamp off
± 0.3 dB Ref level 0 dBm; 10 dB RF attenuation
Preamp on
± 0.4 dB Ref level -30 dBm; 0 dB RF attenuation

Frequency Response

Preamp off Attenuation: 10 dB; Reference: 160 MHz; 20 to 30°C
100 kHz to 2.0 GHz ± 0.5 dB
2GHz to 3.25 GHz ± 0.7 dB
Preamp on Attenuation: 0 dB; Reference: 160 MHz; 20 to 30°C
1 MHz to 2 GHz ± 0.6 dB
2 GHz to 3.25 GHz ± 0.8 dB

Attenuation Switching Uncertainty

Attenuator setting 0 to 50 dB in 1 dB step
Uncertainty
± 0.25 dB reference: 160 MHz, 10dB attenuation

RBW Filter Switching Uncertainty

1 Hz to 1 MHz
± 0.25 dB reference : 10 kHz RBW

Level Measurement Uncertainty

Overall Amplitude Accuracy
± 1.5 dB 20 to 30°C; frequency > 1 MHz; Signal input 0 to -50 dBm; Reference level 0 to -50 dBm; Input attenuation 10 dB; RBW 1 kHz; VBW 1 kHz; after cal; Preamp Off
± 0.5 dB Typical

Spurious Response

Second Harmonic Intercept
  Preamp off; signal input -30dBm; 0 dB attenuation
+35 dBm Typical; 10 MHz < fc < 775 MHz
+60 dBm Typical; 775 MHz ≤ fc < 1.625 GHz
Third-order Intercept
  Preamp off; signal input -30dBm; 0 dB attenuation
> 1dBm 300 MHz to 3.25 GHz
Input Related Spurious
< -60 dBc Input signal level -30 dBm, Att. Mode, Att=0dB; 20-30ºC
> 1dBm 300 MHz to 3.25 GHz
Residual Response (inherent)
<-90 dBm Input terminated; 0 dB attenuation; Preamp off

Sweep

Sweep Time

Range
204 us to 1000 s Span > 0 Hz
50 us to 1000 s Span = 0 Hz; Min Resolution = 10 us

RF Preamplifier

Frequency Range 1 MHz to 3.25 GHz
Gain
18 dB Nominal
  (installed as standard)

Front Panel Input/Output

RF Input

Connector Type N-type female
Impedance
50 ohm Nominal
VSWR
<1.6 :1 300 kHz to 3.25 GHz; Input attenuator ≥ 10 dB

Power for Option

Connector Type N-type female
Voltage/Current
DC +7V / 500 mA max With short-circuit protection

USB Host

Connector Type A plug
Protocol
Version 2.0 Supports Full/High/Low speed

MicroSD Socket

Protocol SD 1.1
Supported Cards
microSD, microSDHC Up to 32GB capacity

Rear Panel Input/Output

Reference Output

Connector Type BNC female
Output Frequency
10 MHz Nominal
Output Amplitude 3.3V CMOS
Output Impedance 50 ohm

Reference Input

Connector Type BNC female
Input Reference Frequency 10 MHz
Input Amplitude -5 dBm to +10 dBm
Frequency Lock Range Within ± 5 ppm of the input reference frequency

Alarm Output

Connector Type
BNC female Open-collector

Trigger Input/ Gated Sweep Input

Connector Type BNC Female
Input Amplitude 3.3V CMOS
Switch Auto selection by function

LAN TCP/IP Interface

Connector Type RJ-45
Base 10Base-T; 100Base-Tx; Auto-MDIX

USB Device

Connector Type
B plug For remote control only; supports USB TMC
Protocol
Version 2.0 Supports Full/High/Low speed

IF Output

Connector Type SMA female
Impedance
50 ohm Nominal
IF Frequency
886 MHz Nominal
Output level
-25 dBm 10 dB attenuation; RF input: 0 dBm @ 1 GHz

Earphone Output

Connector Type 3.5mm stereo jack, wired for mono operation

Video Output

Connector Type DVI-I ( integrated analog and digital) , Single Link. Compatible with VGA or HDMI standard through adapter

RS232 Interface

Connector Type
D-sub 9-pin female Tx, Rx, RTS, CTS

GPIB Interface (Optional)

Connector Type IEEE-488 bus connector

AC Power Input

Power Source AC 100 V to 240 V, 50 / 60 Hz Auto range selection

Battery Pack (Optional)

Battery pack
6 cells, Li-Ion rechargeable, 3S2P With UN38.3 Certification
Voltage DC 10.8 V
Capacity 5200 mAh / 56Wh

General

Internal Data storage 16 MB nominal
Power Consumption <65 W
Warm-up Time < 30 minutes
Temperature Range
+5 °C to +45 °C Operating
-20 °C to + 70 °C Storage
Weight
4.5 kg (9.9 lb) Inc. all options (Basic + TG + GPIB + Battery)
Dimensions
210 x 350 x 100 (mm) Approximately
8.3 x 13.8 x 3.9 (in)  

Tracking Generator (Optional)

Frequency Range 100 kHz to 3.25 GHz
Output Power -50 dBm to 0 dBm in 0.5 dB steps
Absolute Accuracy
± 0.5 dB @160 MHz, -10 dBm, Source attenuation 10 dB, 20 to 30°C
Output Flatness
Referenced to 160 MHz, -10 dBm
100 kHz to 2 GHz ± 1.5 dB
2 GHz to 3.25 GHz ± 2 dB
Output Level Switching Uncertainty
± 0.8 dB Referenced to -10 dBm
Harmonics
< -30 dBc Typical, output level = -10 dBm
Reverse Power +30 dBm max.
Connector type N-type female
Impedance
50 ohm Nominal
Output VSWR
< 1.6:1 300 kHz to 3.25 GHz, source attenuation ≥ 12 dB

Do you have a 3.25 GHz Spectrum Analyzer with Tracking Generator that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your 3.25 GHz Spectrum Analyzer with Tracking Generator calibrated today! Click Here!