0
Authorized Canadian Distributor & Service Centre
Your Cart
(empty)
Cart : (empty)

Three all new Test Tools from GW Instek



GW Instek just launched 3 all new Test tools. A high speed spectrum analyzer, a 2 channel high precision programmable DC power supply and an all new series of hybrid linear programmable switching DC power supply. 

The GSP-9330 High Test Speed Spectrum Analyzer

The NEW  GSP-9330, a high test speed spectrum analyzer with 3.25 GHz, provides the fastest 204 μs sweep speed.  Users, via high speed sweep time, can easily handle and analyze modulation signals. The keys to handling modulated signals are fast  sweep time and signal demodulation functions.  In addition to the analog AM/FM demodulation and analysis function, GSP-9330 also provides digital signal ASK/FSK, and 2FSK demodulation and analysis capabilities. Nowadays, EMC issues are very crucial to product's design processes. Therefore, GSP-9330 has incorporated the EMC pretest solution to facilitate EMC tests . The simple and easy EMC pretest procedures from GSP-9330 can tremendously shorten users' product launch timeline.

GSP-9330 Features:

  •  9kHz – 3.25GHz Frequency Range
  • 204 μs to 1000S sweep time
  • Sensitivity -149dbm/Hz [Pre-Amp ON]
  • Optional Tracking Generator [factory install only]
  • Built-in Pre-amplifier, 50db Attenuator and Sequence Function
  • Built-in EMI Pretest Function
  • Built-in 2FSK Analysis, AM/FM/ASK/FSK Demodulation & Analysis
  • Built-in Spectrograph, Topographic and Split-Window display modes
  • Remote control EMI Measurement Software – SpectrumShot ™
  • LAN, USB, RS-232 I/O, GPIB option
  • Battery Pack option

GSP-9330 - 3.25 GHz Spectrum Analyzer

$6,064 (USD)

The brand new GSP-9330, a high test speed spectrum analyzer with 3.25 GHz, provides the fa...

View Product

GSP-9330TG - 3.25 GHz Spectrum Analyzer with Tracking Generator

$7,497 (USD)

The brand new GSP-9330, a high test speed spectrum analyzer with 3.25 GHz, provides the fa...

View Product

 

THE PPH-1503D 2 Channel High Precision Programmable DC Power Supply

The PPH-1503/1503D are equipped with the excellent transient recovery time , which can, in less than 40us,  recover the output voltage to within 100mV of the previous voltage output when the current level changes from 10% to 100% of the full scale. PPH-1503D's CH1 has the built-in battery simulation function, which can define output impedance settings so as to accurately simulate battery's impedance characteristics during battery discharge. Fast transient recovery time and built-in battery simulation function together facilitate PH-1503D to accurately simulate battery's real behavior pattern so as to conduct product tests. PPH-1503D is not only suitable for simulating battery, charger and supplying power to DUT, but also ideal for simulating an electronic load  to conduct discharge tests with its sink current capability.

PPH-1503/1503D Features:

  • Dual Channel DC Power Output
  • Ch1: 45W (0-15V/0-3A or 0-9V/0-5A)
  • Ch2: 18W (0-12V/0-1.5A)
  • 3.5 Inch TFT LCD Display
  • C.V. and C.C. operation
  • Built-in DVM Measurement Function
  • High Measurement Resolution (1mV/0.1uA for 5mA range)
  • External Relay control
  • Sink Current capability
  • Multiple interfaces USB/GPIB/LAN
  • 5 Sets of Memory Presets
  • Built-in battery simulation function

PPH-1503 - Programmable High Precision DC Power Supply

$1,512 (USD)

PPH-1503 is a high-speed and high-precision DC Power Supply with dual range of 15V/3A or 9...

View Product

PPH-1503D - 45W High Precision Dual Channel Output DC Power Supply

$2,750 (USD)

GW Instek introduces new PPH-1503D programmable high precision dual-channel DC power suppl...

View Product

 

PLR Series Hybrid Linear Programmable Switching D.C. Power Supply

GW Instek launches the new generation PLR series programmable switching D.C. power supply. The  single power output ranges are 360W and  720W. The series comprises 6 models and the voltage ranges are 20V, 36V and 60V. The PLR series is a hybrid circuit design which incorporates  front stage switching and rear stage linear architectures. The unique advantages of this design benefit from the combination of both switching and linear structures. The front stage switching structure can effectively reduce size and weight, and the rear stage linear structure can maintain lower ripple voltage, lower ripple current, and faster transient response.

PLR Series Features:

  • Low Ripple and Noise (0.5mVrms/ 10mArms)
  • Fast transition recovery time(100us)
  • Maximum 2 units in series connections or 3 units in parallel connections
  • Output Voltage Rating: 20V / 36V / 60V
  • Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
  • Protection: OVP, UVP, OCP, remote sensing (Terminal open)
  • External Analog Control Function
  • PC Remote Interface (Standard): RS-232; (Optional) :  GPIB / USB / LAN
  • Output off timer function (Range:1 min to 1000 hours & 59mins)

PLR 20-18 - 360W Programmable DC Power Supply

$1,599 (USD)

(0~20V/ 0~18A/ 360W) Programmable DC Power Supply...

View Product

PLR 20-36 - 720W Programmable DC Power Supply

$2,040 (USD)

(0~20V/ 0~36A/ 720W) Programmable DC Power Supply...

View Product

PLR 36-10 - 360W Programmable DC Power Supply

$1,379 (USD)

(0~36V/ 0~10A/ 360W) Programmable DC Power Supply...

View Product

PLR 36-20 - 720W Programmable DC Power Supply

$1,874 (USD)

(0~36V/ 0~10A/ 360W) Programmable DC Power Supply...

View Product

PLR 60-6 - 360W Programmable DC Power Supply

$1,433 (USD)

(0~36V/ 0~10A/ 360W) Programmable DC Power Supply...

View Product

PLR 60-12 - 720W Programmable DC Power Supply

$1,764 (USD)

(0~60V/ 0~12A/ 720W) Programmable DC Power Supply...

View Product